DURAN® Desiccator with plane flange and Novus NS junction, tubulature in lid, DN 200
Capacity - ml |
5800
|
Diameter (id) - mm |
224
|
Diameter (od) - mm |
270 +/- 2
|
Height (h) - mm |
296
|
Neck |
DN200
|
Tubulature/side neck |
NS24/29
|
Material |
Glas
|
Colour |
Helder
|
- Vacuum-tight, made from DURAN® borosilicate glass 3.3. To accelerate drying, a vacuum can be applied via the stopcock. Spare parts such as lids, bases, stopcocks and caps can be interchanged (observe DN).
|
- Typical applications: drying of moist samples and storage of moisture-sensitive substances.
|
- DURAN® desiccators are used for drying moist substances or as storage vessels for moisture-sensitive products. To accelerate the drying process, the desiccators can be used under vacuum. Due to the high wall-thickness of the vessels and the exact machining of the vacuum-tight ground joints on the lid and base, storage under vacuum is possible - even over extremely long periods.
|
- Designed for use under full vacuum.
|
- Due to the high wall thickness and the reduced thermal shock resistance under pressure loading, the desiccators must not be heated on one side only or heated using a naked flame.
|
- Before evacuation, it is recommended that the glass surfaces of the desiccator be checked for damage such as scratches, cracks or nicks. Damaged desiccators must not be used for safety reasons.
|
- Never expose desiccators to abrupt pressure changes (do not suddenly ventilate evacuated vessels).
|